TST Product
TST Helmet
Product overview
The TST water jetting helmet combines a protective helmet, visor and hearing protection for demanding industrial water jetting operations.
Practical use and comfort
Its adjustable suspension supports a secure fit, while the visor can be raised when appropriate and the hearing protectors adjusted for comfort.
Design and construction
The helmet is made from fibreglass-reinforced polyamide. The visor helps shield the eyes and face, and the integrated hearing protection reduces hazardous noise.
Protection and selection
The assembly is tested against sweeping water jets under specified conditions up to 3,000 bar. Check the individual component certifications, correct fit and instructions before use.
Specifications
Downloads
General Specifications |
|
|---|---|
| Article number | 5102068 5000 |
| Size | One size (53–62) |
| Shell material | Fibreglass-reinforced polyamide |
| Temperature range | −30°C to +150°C |
| Recommended service life | 3–5 years |
| Hearing protection | SNR 32 dB |
| Standards | EN 397:2012; EN 166:2001; EN 352-3:2002; EU 2016/425 |
Protection Levels |
|
|---|---|
| Single nozzle | 2000 bar |
| Rotor nozzle | 3000 bar |
Test Conditions |
||||||||
|---|---|---|---|---|---|---|---|---|
| Nozzle | Pressure (bar) | Flow (L/min) | Nozzles | Nozzle Ø (mm) | RPM | Distance (mm) | Linear speed (m/s) | Result |
| Single | 2000 | 17.9 | 1 | 0.8 | — | 75 | 0.5 | No penetration |
| Rotor | 3000 | 19.5 | 2 | 0.6 | 3000 | 75 | 0.5 | No penetration |
Downloads
Support
Our expert staff are available Monday to Friday from 8:00 AM - 4:30 PM (CET) to answer all your questions about this product.
Support
Our expert staff are available Monday to Friday from 8:00 AM - 4:30 PM (CET) to answer all your questions about this product.